AdMob banner sizes: every standard size, plus adaptive and smart banners

Every AdMob banner size in dp, what replaced smart banners, how anchored adaptive, inline adaptive and collapsible banners differ, and code for Android and iOS.

Storewatch blog cover: AdMob banner sizes: every standard size, plus adaptive and smart banners

AdMob has five fixed banner sizes, from 320x50 up to 728x90 and the 300x250 medium rectangle, and one adaptive family that Google now recommends instead. Smart banners, which stretched to the screen width at a fixed height, are deprecated. Adaptive banners replaced them: you give AdMob a width and it picks the best height.

This guide lists every size with its constant, explains anchored adaptive, inline adaptive and collapsible banners, and shows the current code to request an anchored adaptive banner on Android (Kotlin) and iOS (Swift). It reflects Google's documentation as of November 2026.

The fixed banner sizes

Google's fixed size banner page lists five sizes, in dp (density-independent pixels, the same units iOS docs call points). A fixed banner can only be filled by ads of exactly that size, which is why Google steers new code towards adaptive banners.

Size (dp)NameAndroid constantiOS constantWhere it fits
320x50BannerBANNERGADAdSizeBannerThe classic phone banner. Phones and tablets.
320x100Large bannerLARGE_BANNERGADAdSizeLargeBannerA taller strip when you have the room. Phones and tablets.
300x250IAB medium rectangleMEDIUM_RECTANGLEGADAdSizeMediumRectangleInside content, such as between list items or on a results screen. Phones and tablets.
468x60IAB full-size bannerFULL_BANNERGADAdSizeFullBannerTablets only (per Google's iOS page).
728x90IAB leaderboardLEADERBOARDGADAdSizeLeaderboardTablets only (per Google's iOS page).

The iOS names above are the ones Google's iOS page lists. In SDK 12 and later Swift dropped the GAD prefix from types, so check Xcode's autocomplete for the exact Swift spelling. For any other size, Google's iOS page shows adSizeFor(cgSize:) for a custom size, but a custom size only fills with ads that match it.

What replaced the smart banner

Google's banner ads overview says support for smart banners is deprecated. A smart banner filled the screen width at a fixed height, so on some devices it looked small. The recommended replacement is the adaptive banner, which Google describes as intended to replace both smart and standard banners.

If your code still says SMART_BANNER, switch to an anchored adaptive banner (below). The layout code is almost the same: you ask for a width instead of a fixed size.

Anchored adaptive, inline adaptive and collapsible

TypeHeightUse it for
Anchored adaptiveFixed once set. Per Google, at most 150 dp or 20% of the device height in the current orientation, whichever is smaller.A banner pinned to the top or bottom of a screen that stays put.
Inline adaptiveVariable. With no max height set it can be as tall as the device.A banner inside scrolling content, such as a feed or article.
CollapsibleStarts as a larger overlay, then collapses to the banner size you defined.Anchored banners where you want a bigger first impression. Listed as a beta format.

Anchored adaptive banners

This is the one most apps want. Google's anchored adaptive guide now centers on the large anchored adaptive banner: a taller variant for layouts that don't scroll, between 50 and 150 dp and up to 20% of the screen height. The standard anchored size has a shorter maximum, and Google's pages don't publish a fixed number for it.

Google added the large variant because the old height limits were set years ago and looked small on modern high-resolution phones. It is an in-place replacement and 320x50 ads can still fill the larger slot, but Google says to test your layouts because the returned size can change (help article).

Inline adaptive banners

For ads inside scrolling content, inline adaptive banners are taller and don't use fixed heights. On Android you pick between getCurrentOrientationInlineAdaptiveBannerAdSize(context, width) for apps that rotate, the portrait and landscape variants for a fixed orientation, and getInlineAdaptiveBannerAdSize(width, maxHeight) when you want a height cap. Google's iOS page notes that without a max height, the limit is the device height.

Collapsible banners

Collapsible banners open as a larger overlay with a button that collapses them to your normal banner size. You request one by adding an extra with the key collapsible and the value top or bottom, matching where the banner sits. Two limits to know: they only serve for Google demand (mediated ads show as normal banners), and refreshes after a collapsible ad don't request another collapsible one unless you request it manually.

Request an anchored adaptive banner on Android

As of November 2026 the Android SDK is version 25.5.0 (com.google.android.gms:play-services-ads:25.5.0, minimum SDK 24 per Google's quick start). Version 25.0.0 added getLargeAnchoredAdaptiveBannerAdSize() and deprecated getCurrentOrientationAnchoredAdaptiveBannerAdSize(Context, int) (release notes).

// Width in dp: the full screen width here; use your container's width if it is narrower.
val displayMetrics = resources.displayMetrics
val adWidth = (displayMetrics.widthPixels / displayMetrics.density).toInt()

val adView = AdView(this)
adView.adUnitId = "ca-app-pub-3940256099942544/9214589741" // Google's test ID
adView.setAdSize(AdSize.getLargeAnchoredAdaptiveBannerAdSize(this, adWidth))
this.adView = adView

binding.adViewContainer.removeAllViews()
binding.adViewContainer.addView(adView)

// loadAd() must run on the main thread.
adView.loadAd(AdRequest.Builder().build())

Call adView.destroy() when the screen goes away. The ad unit ID above is Google's demo ID for adaptive banners; swap it for your own before release (see the test ads guide).

Request an anchored adaptive banner on iOS

The iOS SDK is at version 13.13.0 as of November 2026. Version 12 renamed the Swift types (GADBannerView became BannerView, GADRequest became Request, per Google's migration guide), and version 13 added the large anchored adaptive functions and deprecated the current-orientation one (release notes). Google's anchored adaptive page uses this:

// Initialize the banner view.
bannerView = BannerView()
bannerView.delegate = self
bannerView.translatesAutoresizingMaskIntoConstraints = false
view.addSubview(bannerView)

// No width or height constraints: the ad size gives the banner its intrinsic size.
NSLayoutConstraint.activate([
  bannerView.bottomAnchor.constraint(equalTo: view.safeAreaLayoutGuide.bottomAnchor),
  bannerView.centerXAnchor.constraint(equalTo: view.centerXAnchor),
])

func loadBannerAd(bannerView: BannerView) {
  let width = view.bounds.inset(by: view.safeAreaInsets).width
  bannerView.adSize = largeAnchoredAdaptiveBanner(width: width)
  bannerView.load(Request())
}

Set adSize before calling load. The test ID for this format on iOS is ca-app-pub-3940256099942544/2435281174. Google's page uses a fixed width of 375 in its example; reading the safe-area width, as above, is the same call with a real number.

Layout tips

  • Pass a real width. The width is the one input. Use the container's width in dp, not a hard-coded 320.
  • Don't give the banner a fixed height. On iOS the ad size supplies the intrinsic height; on Android let the container wrap its content.
  • Stay within the screen. Google says the ad size must be less than or equal to the device screen size, compared in dp.
  • Request a new size when the width changes. After a rotation or in split-screen, request a banner with a width that fits the new layout.
  • Reserve the space. A banner that pops in and pushes content around feels broken. Keep the container in place while the ad loads.
  • Refresh. If you set a refresh rate in the AdMob UI, the iOS SDK refreshes only while the banner is visible. Google also notes ads expire after an hour, so don't keep preloaded ones longer.
  • Phones and tablets differ. The 468x60 and 728x90 fixed sizes are tablet-only; an adaptive banner handles both without a branch in your code.

Tip: Wondering what a banner is worth once it is live? The free AdMob revenue calculator turns impressions and eCPM into an earnings estimate.

Once ads are running, Storewatch shows each app's AdMob estimated earnings, impressions, eCPM and match rate next to its App Store proceeds, so you can see whether a layout change moved the numbers. It doesn't change your ad setup; that stays in your code and AdMob.

Frequently asked questions

What is the standard AdMob banner size?

The classic banner is 320x50 dp. Google lists it with four others: 320x100, 300x250, 468x60 and 728x90. For new work, Google recommends adaptive banners instead of any fixed size.

Are AdMob smart banners still supported?

No. Google's help center says support for smart banners is deprecated and points to adaptive banners as the replacement.

What is the difference between anchored and inline adaptive banners?

An anchored adaptive banner is pinned to the top or bottom of the screen and keeps one height. An inline adaptive banner sits inside scrolling content and has a variable height, which can be limited with a maximum height.

How tall is an anchored adaptive banner?

Google's help center says anchored banners are at most 150 dp or 20% of the device height in the current orientation, whichever is smaller. The large anchored variant ranges from 50 to 150 dp.

Can I use collapsible banners with mediation?

No. Collapsible banners are only available for Google demand. Ads from mediated networks show as regular, non-collapsible banners.