AdMob eCPM: what it means, why it changes and what to do when it drops

What eCPM means in AdMob, how it's calculated, why a higher eCPM can earn you less, how eCPM floors work, where to compare with similar apps, and how to find the cause of a drop.

Storewatch blog cover: AdMob eCPM, what it means and why it changes

eCPM in AdMob is what you earned for every 1,000 ads shown: estimated earnings ÷ impressions × 1,000. If an ad unit earned $12.60 from 8,400 impressions, its eCPM is $1.50. In rupees, ₹1,050 from 8,400 impressions is an eCPM of ₹125.

It's the number most developers watch, and the one that's easiest to misread. This guide covers what eCPM does and doesn't measure, the number to look at alongside it, how eCPM floors work, where AdMob lets you compare your eCPM with similar apps, and how to track down a drop. Everything about AdMob's settings and reports comes from Google's AdMob help as of November 2026.

How AdMob calculates eCPM

Google's reports glossary defines eCPM as the estimated earnings accrued for every 1,000 impressions: estimated earnings divided by impressions, times 1,000. Two details matter:

  • It's based on estimated earnings. AdMob finalizes earnings at the end of each month and removes invalid activity, so the finalized amount can come in lower. A day's eCPM is good for trends, not for your bank balance. The AdMob payments guide covers when the final number lands.
  • Waterfall sources can differ. The glossary notes that for waterfall ad sources, eCPM may not match the formula because of invalid traffic.

The "e" stands for effective. Advertisers bid either per click (CPC) or per thousand impressions (CPM), and eCPM turns both into one number per 1,000 impressions, so you can compare ad units, formats and countries on the same scale.

Why a higher eCPM can earn you less

eCPM only counts ads that were shown. It says nothing about the ad requests that came back empty, or the ads that loaded and were never displayed. Your app's earnings depend on three steps, which the glossary defines:

MetricFormulaWhat it tells you
Match rateMatched requests ÷ requestsHow often an ad source sent an ad back
Show rateImpressions ÷ matched requestsHow often a returned ad was actually displayed
eCPMEstimated earnings ÷ impressions × 1,000What each 1,000 displayed ads earned

Multiply them and you get what every 1,000 ad requests earned you:

Earnings per 1,000 requests = eCPM × match rate × show rate (or estimated earnings ÷ requests × 1,000).

AdMob's glossary doesn't list this as a metric, so work it out from your report. It's the fairer number for judging a change, because your app makes the same requests either way. An example with made-up numbers:

eCPMMatch rateShow ratePer 1,000 requests
Before raising a floor$1.5090%80%$1.08
After raising a floor$2.0060%80%$0.96

eCPM went up by a third and earnings went down. Google makes the same point on its eCPM fluctuation page: if a lower eCPM allows more impressions, your estimated earnings may actually increase, so watch earnings and impressions too, not eCPM alone.

Tip: The free AdMob revenue calculator does this multiplication for you. Run it with your current rates and again with the change you're considering.

eCPM floors

An eCPM floor (a minimum eCPM) tells the AdMob Network not to serve ads below a price you set. It's set per ad unit, under the ad unit's Advanced settings. Google's eCPM floors page lists three options:

SettingWhat it does
Google optimized (the default, set to All prices)Google sets the floor from your users' locations, the ad unit's traffic and historical data. You pick High floor (beta, favors higher-paying ads), Medium floor (beta, balances higher-paying ads and fill) or All prices (maximizes fill at every price).
Manual floorYou set the minimum eCPM yourself. The AdMob Network won't serve ads below it.
DisabledNo floor on the ad unit.

What to know before you change one:

  • A higher floor usually means a lower fill rate. Google says so directly, and its low match rate guide lists a high floor as a common cause. That's the trade-off in the table above.
  • Lowering or cancelling optimized floors can pull eCPM down, because many low bids then reach your inventory.
  • Floors cover the AdMob Network and bidding ad sources only, not third-party waterfall sources. If an ad misses the floor, mediation moves on through the waterfall.
  • Floors are best-effort for CPC ads. AdMob predicts each click-based ad's eCPM and excludes the ones predicted to fall below the floor.
  • New ad units need time. It can take a week or more for a floor to apply accurately, so an eCPM below your floor in the first days usually means AdMob is still learning.
  • Country floors override the ad unit's setting for users in the countries you pick.

Where to see eCPM in AdMob

  • Ads Activity report: eCPM next to impressions, match rate and estimated earnings. Break it down by app, ad unit, format and country, which is where most of the answers are.
  • Observed eCPM: for mediation, AdMob's estimate of a third-party network's average eCPM from historical revenue. The glossary says it's shown only for optimized third-party ad networks.
  • eCPM Trends: benchmarks against similar apps (see below).

Is my eCPM good? Compare it with eCPM Trends

Lists of "average eCPM by country" go out of date quickly, and most don't say where their numbers come from. AdMob has a better source built in. eCPM Trends compares your apps with a peer group of other AdMob apps:

  • It shows the last 14 days.
  • By default it picks your highest-earning app and a peer group in the same category, such as games or productivity.
  • You can choose from over 300 categories, more than one at a time, and iOS, Android or both.
  • The data covers the AdMob Network, third-party waterfall and bidding, and partner bidding, aggregated and anonymized.
  • Accounts are opted in by default. An administrator can opt out under Settings → Account → Reports → Trends and benchmarks, but then loses access to the report, and can only opt back in after 90 days.

If your filters are too narrow, Google's eCPM Trends guide says the chart may show only your own apps with no peer data, to protect other publishers' privacy. Widen the category or platform and it comes back.

Why your eCPM changes

Google's eCPM fluctuation page names these causes:

  • The market. eCPM depends heavily on market and platform. Google's own example: it can rise in Singapore while falling in Brazil over the same period. A shift in where your users come from moves your average even if nothing else changed.
  • Seasonality. Compare week over week, month over month and year over year before you react. If the change is seasonal, it's likely outside your control.
  • Category blocking. Blocking one ad rarely matters. Blocking whole categories removes bidders from the auction, and the effect adds up.
  • Floor changes, covered above.

Format matters too. Banners, interstitials, rewarded and app open ads each earn at their own rate, so a blended eCPM changes whenever your mix of formats changes. A new app or ad unit can also see less demand for up to a week while Google evaluates its traffic quality, per Google's match rate guide.

My eCPM dropped: what to check

Google's earnings drop checklist boils down to these steps:

  1. Look at least 3 months back. A report over a short window can make a normal dip look like a cliff.
  2. Find the day it started. Then open change history in AdMob and look for anything you changed around that date: a floor, a blocking rule, a new ad unit. Google suggests reverting a setting if it caused an unexpected swing.
  3. Narrow it down. One app or all of them? One country, one format, one ad unit?
  4. Find the metric that moved with your earnings. Google lists impressions, eCPM, impression CTR, match rate and show rate. If eCPM fell but impressions rose, check whether earnings actually dropped at all.
  5. Check your own app. A release that moved an ad, changed when ads load, or crashes more can change your numbers without AdMob changing anything.

The last step is the one AdMob can't do for you, because it doesn't know when you shipped. Storewatch shows each app's AdMob estimated earnings, impressions, eCPM, match rate and ad requests on an AdMob tab, next to its App Store proceeds and your release dates. Group the table by event to see eCPM between one release and the next, or use Before and After to compare the days around a single release. Storewatch only reads your AdMob reports; it doesn't change any settings.

Frequently asked questions

What is eCPM in AdMob?

eCPM is your estimated earnings for every 1,000 ad impressions. AdMob calculates it as estimated earnings divided by impressions, multiplied by 1,000. It turns click-based and impression-based ads into one comparable number.

How do I calculate AdMob eCPM?

Divide estimated earnings by impressions and multiply by 1,000. For example, $12.60 from 8,400 impressions is an eCPM of $1.50.

Why is my AdMob eCPM so low?

The usual causes are where your users are, your ad formats, seasonality, blocked ad categories and floor settings. A new app or ad unit can also get less demand for up to a week while Google evaluates its traffic. Compare your app with similar apps in AdMob's eCPM Trends report before changing anything.

Should I set a manual eCPM floor?

Only if you've measured the trade-off. A higher floor usually raises eCPM but lowers fill rate, and the lost impressions can cost more than the higher price earns. Compare earnings per 1,000 requests before and after, not eCPM alone.

What is observed eCPM?

Observed eCPM is AdMob's estimate of a third-party ad network's average eCPM, based on historical revenue. It appears only for optimized third-party ad networks in mediation.

Is a higher eCPM always better?

No. eCPM ignores requests that got no ad and ads that were never shown. If a higher eCPM comes with a lower match rate or show rate, you can end up earning less. Google notes that a lower eCPM with more impressions can increase earnings.